- Joined
- May 21, 2016
- Messages
- 515
- Reaction score
- 1,120
I had to pull out a sheet of corrugated iron from the middle of the roof, which was a very simple job. Putting it back on was a totally different story! I slid it under the sheet above it, but it jammed on the beam under that sheet. The sheet I was trying to slide in had a slight bow in the centre and wouldn't pass over the beam. In the end I had to loosen two more sheets to manoeuvre the first sheet over the beam. They all had roofing nails in them. That was fun getting them out! What started out as a simple job pulling the sheet out turned into a one hour plus ordeal! Does anyone know any tricks to slide the sheet back in without having to loosen the sheets around it? Cheers wiley