Stunning geode skull
- Thread starter Flowerpot
- Start date
Help Support Prospecting Australia:
Flowerpot said:
Very cool :Y:
I believe this is where it came from https://www.skullis.com/Geode-Skulls.html?utm_source=thisiswhyimbroke.com&utm_medium=referral
Following a few Google image leads. Price tag $3600.
- Joined
- May 26, 2018
- Messages
- 385
- Reaction score
- 1,145
[video=480,360]https://youtu.be/1p-nTYKPo_I[/video]
Maybe done by one of these. Went to a cnc expo in Guangzhou china
a few years ago and saw skulls being carved by these machines.
One stand had a log a metre and half tall and about 400 thick,
a person was 3D scanned and a couple of hours later his exact
replica was standing beside him, blew me away.
Maybe done by one of these. Went to a cnc expo in Guangzhou china
a few years ago and saw skulls being carved by these machines.
One stand had a log a metre and half tall and about 400 thick,
a person was 3D scanned and a couple of hours later his exact
replica was standing beside him, blew me away.
Most Spheres are done by laser now. At Tucson Show 2yrs ago there was a Rose Quartz Sphere that weighed 6ton all done by Laser .. Here is a small Skull...
LW...
LW...
- Joined
- May 26, 2018
- Messages
- 385
- Reaction score
- 1,145
[video=480,360]https://youtu.be/jVessUu8Yes[/video]
Laser technology hasn't been developed yet to carve stone
that I've heard of Lonewolf, if there is one, i want it.
A laser will etch stone. And to cut a ceramic tile,
at a depth of 3 to 4 mm at a time, that's using a 4 kw
laser would not be economical... My laser is 80 watts,
will etch stone like agate slices at near half a mm a pass.
There are
many types of lasers, cutting steel, medical uses, etching,
but cnc machines with 6 axis is
what used to carve stone.
Laser technology hasn't been developed yet to carve stone
that I've heard of Lonewolf, if there is one, i want it.
A laser will etch stone. And to cut a ceramic tile,
at a depth of 3 to 4 mm at a time, that's using a 4 kw
laser would not be economical... My laser is 80 watts,
will etch stone like agate slices at near half a mm a pass.
There are
many types of lasers, cutting steel, medical uses, etching,
but cnc machines with 6 axis is
what used to carve stone.
