AuWanderer said:
Wow, Impressive !! The only thing that scares me is...being able to program it....
Otherwise a fine machine.
Don't be scared! Its not programming as such. I have made software before and that scares me a lot.
By programming, it actually means adjusting.
So when you "Program" the machine it is essentially adjusting settings to to give you the best results where you are hunting.
If you change the sensitivity from 85 to 90, You just programmed the machine.
If you change the TX power from 1 to 2, You just programmed the machine.
You can change a lot or a little depending on your experience, I make little adjustments often as I am still in the learning phase.
So the thought in my head is always, "I wonder what would happen if if changed........"
One day I spent about 20 minutes on one signal, just adjusting stuff to get it as clear as I could and seeing what setting made what difference.
Must have looked a little weird doing 10 sweeps, then looking at the remote and doing 10 more, then looking at remote and doing 10 more etc etc.
I hope that makes sense, you can then save your changes as a separate program if you wish.
Happy Hunting.