- Joined
- Oct 31, 2013
- Messages
- 239
- Reaction score
- 82
Hey, I now have all materials to build the walbanker and have cut out the template....just need clarification on the following:
Cable tray.....where it slots into the end of the hopper, are the sides reinforced with angle or are they just folded down.
The angle that is screwed down (between the bread crate and mesh) doesn't look to be equal angle - is it something else?
The carpet - I noticed the top end still has the outer edge attached. It hasn't been cut away from the weave. Is this so that the angle sits properly over it?
I have worked out everything else and have found a place to do the bending for $10 a fold.
Appreciate your help.
Pen
Cable tray.....where it slots into the end of the hopper, are the sides reinforced with angle or are they just folded down.
The angle that is screwed down (between the bread crate and mesh) doesn't look to be equal angle - is it something else?
The carpet - I noticed the top end still has the outer edge attached. It hasn't been cut away from the weave. Is this so that the angle sits properly over it?
I have worked out everything else and have found a place to do the bending for $10 a fold.
Appreciate your help.
Pen