- Joined
- Jan 2, 2017
- Messages
- 2,328
- Reaction score
- 3,016
Usually the supplied repair kit is totaly inadequate. So go to a $2 shop and get a multi pack of super glue, and find a good size peice of some pvc of same thickness. And a sheet of grease proof paper A4 in size. A small pair of scissors, and a small bottle of nail polish remover. Make sure any patch you cut out is rounded, oval is fine.as sharp corners tend to lift when drying. Clean patch area, wipe the area with a cloth with a small amount of nail polish remover( this aids in a good bond) and wipe dry any excess. After applying the patch to the inside firstly, place part of the grease proof paper over the patch , this stops glue contact with your tacky fingers and lifting the patch off when applying pressure. Run a small amount around the entire edge. Wait at least ten minutes, Then do the outside last. Pressing down on any lifted cut area whilst tacky ( using the paper again to do so)
Now you've had a break, work out how you cut them, sharp edge on your banker?
Then get back to shoveling!!!
Now you've had a break, work out how you cut them, sharp edge on your banker?
Then get back to shoveling!!!