Jaros said:Gotta say that mine looks much the same as yours does. Except I have an Engel Fridge.
Jaros said:Gotta say that mine looks much the same as yours does. Except I have an Engel Fridge.
Ridge Runner said:Jaros said:Gotta say that mine looks much the same as yours does. Except I have an Engel Fridge.
Yeah and you put the handle on the right way up, LOL.
His one is an Engel, :Y:
Those Draws cost a fortune. I priced em up for mine and they want an arm and a leg for them Think I might work out my own version, I need to invest in the fridge slide first just to make sure it all fits.
I like how those dividers lock together. erfect:
Gravity said:Ridge Runner said:Jaros said:Gotta say that mine looks much the same as yours does. Except I have an Engel Fridge.
Yeah and you put the handle on the right way up, LOL.
His one is an Engel, :Y:
Those Draws cost a fortune. I priced em up for mine and they want an arm and a leg for them Think I might work out my own version, I need to invest in the fridge slide first just to make sure it all fits.
I like how those dividers lock together. erfect:
Check out draw Dividers at Bunnings, from 400mm,600mm,900mm...I cut them down to suite, best thing is you can just unclip and change the setup anyway you like :Y:
Ridge Runner said:Gravity said:Ridge Runner said:Jaros said:Gotta say that mine looks much the same as yours does. Except I have an Engel Fridge.
Yeah and you put the handle on the right way up, LOL.
His one is an Engel, :Y:
Those Draws cost a fortune. I priced em up for mine and they want an arm and a leg for them Think I might work out my own version, I need to invest in the fridge slide first just to make sure it all fits.
I like how those dividers lock together. erfect:
Check out draw Dividers at Bunnings, from 400mm,600mm,900mm...I cut them down to suite, best thing is you can just unclip and change the setup anyway you like :Y:
I like how you have that set up, because it leaves so much above floor space for other gear or sleeping, Top Job. :Y:
goldtruck59 said:drawers are my middle name. Been making them for a living for 25 years. Couple of pictures of our handy work. Happy to do a keen price for any PA members.
https://www.prospectingaustralia.co...954000_1359974-200_series_premhcb_ts_1830.jpg
https://www.prospectingaustralia.co...4000_1723887-bt50_fridgeslide-genset_20cm.jpg
https://www.prospectingaustralia.co...1998-76_series_eac-2_cargoshelf_2904_20cm.jpg
https://www.prospectingaustralia.co...544954001_2857699-colorado_eco__20cm_3015.jpg
https://www.prospectingaustralia.co...9860-px_ranger_fs-3.5_eac1_20cm-grey_2991.jpg
GT
seen a lot of townies like that to ha ha not a speck of dust :Y:mudgee hunter said:Geeeeeze, ya pony's! not a speck of dust!!!!
7.62marksman said:
7.62marksman said:
LoneWolf said:Here is an alternative if your handy with your hands..... A lot of 4x4 owners on another forum have used the Qubelok System with great success ... I made some for a mate and put Liquid Nails and a tek screw in the joints as sometimes they get a squeak after awhile.. So far for the past 3yrs he has had no issues and He has done some Serious 4WD Tracks including 3 trips on the Plenty Hwy and that is one of the worst roads for corrugations.. When you screw your ply to it, it becomes very strong...
A far cheaper way of building Drawers than paying Big $$$ for a good set-up like above... Yes they are a great set-up the above Drawers, but at a price I can never afford...
I have made mine out of 16mm Ply and use the Polly chopping Boards cut into strips for slides/guides ... A squirt of Silicone spray and they slide real easy.. They have lasted me for 4yrs now and I have done lots of ruff stuff... If I was going to build a different system I would use Qubelok next time...
You can get the bits from Bunnings at a steep price or I get my stuff from Here for a fraction of the price from Bunnings...
http://www.capral.com.au/qubelok
LW.....
mudgee hunter said:Geeeeeze, ya pony's! not a speck of dust!!!!
Enter your email address to join: