Blutooth AT PRO Upgrade

Hey All
For all those AT PRO Users that use headphones
Are you sick of getting the cables wrapped around
Things,tree branches,your arm?
Headphones nearly ripped off your head
Bending down etc...
Try this!! It works a treat??
Our AT is now full wireless Blutooth
No more cables
EM

Nice work Eurekaman. Any details on the model of the headphones you got? I am looking at doing something similar with my Pro.
Cheers

Ramjet

second that, perhaps it may work on my atx

how much delay do you get?

is this it?

Good looking setup, also keen on looking at the headphones. I wonder who will be the first manufacturer to come up with a blue tooth pinpointer as well, for quiet night operation (other than using vibration mode).

I have just ordered a Bluetooth transmitter which looks pretty much like the one Eurekaman has used plus a set of headphones. I will report back how it goes.

The transmitter....

http://www.ebay.com.au/itm/New-Wire...05?pt=LH_DefaultDomain_15&hash=item19f046b7c5

what headphones are you going to test with Ramjet?

Hi All
The headphones are very basic headphones
I bought on EBay for $18 and the transmitter
Was the same price
10 other people have also set theirs up
With complete success, thought I might
Share on here also
There is no delay what so ever and the
Clarity is the same as standard garrett
Setup with the benefit of cord free wireless
Blutooth technology
Make sure you order the transmitter
And headphones with the longest charge
Rate as some units have a very low
Rate say, 2 hours run time
Others say, 10 hours
So read before you buy!
Also I might add
You can Blutooth any detector
That has a headphone jack
Including a CTX3030
EM

One more thing!
It is very important I found after testing
That you order the garrett earphone
Extension to get the sender unit as far
From your control box as possible
Because of interference
It also allows you to mount the sender
Unit on the rear fin with velcrow
Nice and neat!
Don't buy the headphones with a radio
In them, they won't work properly with
The sender
Look forward to seeing how
You guys go
EM

These are the ones I ordered.

http://www.ebay.com.au/itm/3-in-1-W...360446073?pt=AU_headphone&hash=item20e9bd3a79

Ramjet said:

These are the ones I ordered.

http://www.ebay.com.au/itm/3-in-1-W...360446073?pt=AU_headphone&hash=item20e9bd3a79

https://www.prospectingaustralia.com/forum/img/member-images/214/1416233742_bthp1.jpg

Click to expand...

They'll do the job nicely mate
It's really a personal preference in headphones
EM

Thx Eurekaman. This is exactly what I was looking for.

Any update Ramjet, im keen to see how it turns out?

Erg

No probs ERG, hope it comes together for you
The none phone and radio headphones
Are the best to get for this job
Don't know how yours are going to go
Ramjet as some other blokes I know
Got the inbuilt radio type and they were
Useless
Fingers crossed fella
EM

Erg said:

Thx Eurekaman. This is exactly what I was looking for.

Any update Ramjet, im keen to see how it turns out?

Erg

Click to expand...

I have only had a quick look at mine. Seems to be a bit of lag. Been on night shift but have a few days off now so I hope to do some testing with it.

Hi Ramjet
I have had 5 people test theirs
On another forum and no lag at all
Neither had mine you might have to
Tune it or replace the headphones
Regards
EM

do these look ok? for $27.00 free delivery?

SPECIFICATIONS:
Drivers: 57mm speaker X 2
Transducer type: dynamic
Bluetooth version: V4.1
Frequency range: 2.4GHz-2.48GHz
Operating distance: up to 10m (free space)
Bluetooth profiles: A2DPAVRCPHSPHFP
Impedance: 16
Frequency response: 20Hz-20kHz
Sensitivity: 110dB
Distortion: <0.1%(THD)
Music playtime: up to 40 hours
Talk time: up to 45 hours
Standby time: up to 1625 hours
Charging time: about 2 hours
Operational temperature: -10 to 50C

Hi people. Sorry it has taken me so long to get around to updating this. There is a definite lag with the setup I have tested. Maybe with better quality equipment it may be eliminated. My headset also has an FM radio so I tried an FM transmitter but it would not cut out the At Pro's built in speaker. Here is a very short video. The first part is with no head set, the second part is with the bluetooth. Sorry about the volume in the bluetooth part. It should be good enough to see the lag though. The bit without the headset is only 5 seconds.

[video=480,360]http://youtu.be/jWjFfmt2eA4[/video]

joe said:

do these look ok? for $27.00 free delivery?

SPECIFICATIONS:
Drivers: 57mm speaker X 2
Transducer type: dynamic
Bluetooth version: V4.1
Frequency range: 2.4GHz-2.48GHz
Operating distance: up to 10m (free space)
Bluetooth profiles: A2DPAVRCPHSPHFP
Impedance: 16
Frequency response: 20Hz-20kHz
Sensitivity: 110dB
Distortion: <0.1%(THD)
Music playtime: up to 40 hours
Talk time: up to 45 hours
Standby time: up to 1625 hours
Charging time: about 2 hours
Operational temperature: -10 to 50C

https://www.prospectingaustralia.com/forum/img/member-images/175/1417165613_head.png

Click to expand...

Yeah mate, that's what you want
EM

Ramjet said:

Hi people. Sorry it has taken me so long to get around to updating this. There is a definite lag with the setup I have tested. Maybe with better quality equipment it may be eliminated. My headset also has an FM radio so I tried an FM transmitter but it would not cut out the At Pro's built in speaker. Here is a very short video. The first part is with no head set, the second part is with the bluetooth. Sorry about the volume in the bluetooth part. It should be good enough to see the lag though. The bit without the headset is only 5 seconds.

[video=480,360]http://youtu.be/jWjFfmt2eA4[/video]

Click to expand...

Yes no doubt a lag there, but you can't use
Headphones with radio built in as I posted before

Eurekaman said:

Yes no doubt a lag there, but you can't use
Headphones with radio built in as I posted before

Click to expand...

AAhh. I missed that comment EM. Thank you. I will try other headphones.

No worries mate keep trying till you find what
Works
Mine works fine brother
EM