Yesterdays results.
These were found while I was further up the creek exploring
with my SDC so I could not do a comparison while the nuggets
were in situ before digging them up.
I will say in fairness, The deeper nugglet was not found by the
SDC as I had gone over the same ground last week.
It was also sitting under some slate as well and we were both
quite surprised with the results.
All up, This coil is very sensitive and I would rate it very, very
close to an SDC with these flattened bits.
We were hoping to find a prickly bit to really test it out but alas,
We could not find any more.
The coil is not so sensitive on edge sensitivity but I would expect
that taking into consideration the coils construction methods.
Anyway, Some photo's to give a perspective.
I am looking forwards to receiving mine when they come available.
Hi Doug,
I thought I'd give you some pictures of today's effort, especially over
ground that's been gone over a few times with different coils.
9" for the 0.48g, 6-7" for the 0.4g and 5" for the 0.15g.
The Tester