- Joined
- May 1, 2014
- Messages
- 1,958
- Reaction score
- 2,530
A deep rose red rhodolite-type garnet in a scissors-cut crown type design. The colour of this stone is a little deeper than the last one but shows the same rose red tints.
The stone is very clean with no visible inclusions.
At 2 carats in weight and approximately 7.2mm square, it's the ideal size for a ring. If it were to be placed in a setting, it would do best mounted in an open claw-type setting in my opinion, to allow the light to get underneath it because of the depth of colour. Accordingly, I have opted for a cut-corner type design so that the stone has no sharp points to catch on anything.
Is anybody interested in it at $110?
Cheers
The stone is very clean with no visible inclusions.
At 2 carats in weight and approximately 7.2mm square, it's the ideal size for a ring. If it were to be placed in a setting, it would do best mounted in an open claw-type setting in my opinion, to allow the light to get underneath it because of the depth of colour. Accordingly, I have opted for a cut-corner type design so that the stone has no sharp points to catch on anything.
Is anybody interested in it at $110?
Cheers
![1533411710_38612366_10155715755595959_6529071092806451200_n.jpg](https://www.prospectingaustralia.com/forum/img/member-images/2976/1533411710_38612366_10155715755595959_6529071092806451200_n.jpg)
![1533411726_38439972_10155715755680959_7172672268529565696_n_1.jpg](https://www.prospectingaustralia.com/forum/img/member-images/2976/1533411726_38439972_10155715755680959_7172672268529565696_n_1.jpg)
![1533411755_38391731_10155715755775959_5329431828761673728_n.jpg](https://www.prospectingaustralia.com/forum/img/member-images/2976/1533411755_38391731_10155715755775959_5329431828761673728_n.jpg)
![1533411883_38392282_10155715755545959_2932136553360654336_n.jpg](https://www.prospectingaustralia.com/forum/img/member-images/2976/1533411883_38392282_10155715755545959_2932136553360654336_n.jpg)