Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Charts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Gold Prospecting
Prospecting Equipment
Wals cat walk mesh
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Prospecting Australia:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="mudgee hunter" data-source="post: 410506" data-attributes="member: 9124"><p>Yes RM. mine is 27mm from the top of C channel to bottom of bolt. This keeps an air gap of 3-4mm of the underflow restrictors. </p><p>I used 5" big grit flap dics, with the web facing downwards. Stood up right in a vice, Align each edge of the mark to flap disc, and push straight downwards. Use a good Stanley to keep triming the thick burr off. </p><p>With the 5", the scollop radius is the same as a new flap disc.</p><p>NOTE. The mesh has a small lip on the tread side. This must be ground off to give you flat flush surface at the top and bottom edges of the webb, or it will kick the angle incorrectly. Only needs grinding at contact points. One minute job.</p></blockquote><p></p>
[QUOTE="mudgee hunter, post: 410506, member: 9124"] Yes RM. mine is 27mm from the top of C channel to bottom of bolt. This keeps an air gap of 3-4mm of the underflow restrictors. I used 5" big grit flap dics, with the web facing downwards. Stood up right in a vice, Align each edge of the mark to flap disc, and push straight downwards. Use a good Stanley to keep triming the thick burr off. With the 5", the scollop radius is the same as a new flap disc. NOTE. The mesh has a small lip on the tread side. This must be ground off to give you flat flush surface at the top and bottom edges of the webb, or it will kick the angle incorrectly. Only needs grinding at contact points. One minute job. [/QUOTE]
Verification
Post reply
Gold Prospecting
Prospecting Equipment
Wals cat walk mesh
Top