Lightning Ridge crystal nobby

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 1, 2014
Messages
1,958
Reaction score
2,530
Rockhound gave me this stone, which I believe is a Lightning Ridge crystal opal nobby. I know very little about opal.

26708712823_27ebf3516d_c.jpg


27244824291_49c2511609_c.jpg


I sawed the dark grey potch off the end and made a cab from that (not shown) so I could get a feel for working with the material. I had always heard that opal is soft and fragile. This stuff was softer than anything I have faceted but it was still surprisingly tougher than I expected when sawing and grinding. I had been under the impression that a saw blade will go through it like a hot knife through butter - not true, it still took a while to get through it. I would still exercise care with this material but it isn't as fragile as I had believed.

I decided to saw about a third off the translucent side, in keeping with the shape. Surprise! I hadn't see that from the surface.

26834459214_6469c07baf_c.jpg


The smaller bit looks much the same so I made a freeform cab from it. The top is what should be the bottom in a normal cab. I kept working it down from the outside skin but when I reached as thin as I was comfortable going, the bottom still looked much more impressive than the top so I made that the top. Unfortunately, that means the edges are bevelled downwards instead of upwards like a normal cab. If I level the edges, a good amount of brightly coloured material would be lost. You wouldn't see that if it were in a bezel setting I guess.

I can see why the black stuff is the most valuable. This stuff looks nice enough but when I put it down on the black workbench top, the colours really came to life! Like nearly all of my photos, these ones can't do the stone justice. The colours are quite a bit brighter and livelier than shown. Predominately a blue-violet but there is a very pretty streak of glittering green down one side and there are sparkles of orange-red through it as well, the camera just can't seem to capture them.

27409565736_3e9ff5baa8_c.jpg


27443844045_681c5ecdef_c.jpg


My first bit of opal - I think I'm hooked :) How could I have ignored our national gemstone for so long?
 
Throw her into a pendant setting, just a round the outside type one like SA Bogun does with those silver coins ,... I recon that would do it justice, and it would seem different depending on the clothing colours that background it for the lucky wearer. 8) :p :D
 
Yeah, it changes appearance depending on the viewing angle. Hold it up to the light and it's just translucent honey coloured, it's when you look down on it that the colours come to life.

Yep, a bezel pendant setting would really do it :) Wonder if I should polish a thin slice of black obsidian or onyx to put behind it, the dark background seems to really do it.
 
Some sheila somewhere makes some sort of coloured glass with properties that reminded me of what you have there in the fact that it would look different in different circumstances, might loose that effectability with a permanent black background, maybe make two, one of each ,.. double happy femme then anyway. :D
 
Cheers Wally, yeah it surprised the hell out of me.

I have a mate who is a jeweller and former opal miner, I'll ask his advice before doing anything with it. It seems to me that what we want here is the opposite of what we want in a faceted stone. With faceting, we want all light entering through the top to be totally reflected back off the bottom and out the top again, maximum sparkle. But here, I think we want all light that makes it all the way through to the bottom surface of the stone to be absorbed rather than returned so that only the colour layers in the stone return the light back out the top, so they don't have to compete with extra light coming back up off the bottom, which seems to dilute the colours.

But then, I've probably got that wrong :) Hence, I'll ask first.
 
A mate gave me a bag full of those amber opal nobbies a few weeks back, quite keen to get a few of them cabbed. Some are very clear and should come up a treat.

Nice work Lefty.
 
Check em out closely Heatho, there was almost no sign of the colours that were in this one until I sawed it in half. The two stones I got from it are much more colourful than the photos show and the look of them changes with not only the viewing angle but with different types of light and with the time of day.

These ones polished up beautifully with Cerium oxide on a felt buff.

It still feels a bit weird to have the stone dictate the shape 100%, not only the profile but the sides and bottom as well. Both cabs look upside-down to me, the flat top is what should be the bottom. But as I kept working them down, the curved dome just never got to a stage where it looked near as good as the bottom - the very best stuff must have been right in the middle of the nobby and I sawed straight through it. You won't be able to tell in a bezel setting of course.

Cheers
 
I was in White Cliffs about 10 years ago and found a golf ball size piece of what I'm told is a partial pineapple. I found it walking the dry creek bed just up from town. It's got a great show of color in the right light. A local told me it was worth between $500 and $1000 dollars.
 
Between Lefty, Heatho and the rain, it got the better of me and I pulled out an old box of rocks I had as a child.

It is only a very small chip and has just a little sparkle when left alone

1465048005_image.jpg


Put it up to the light and the sparkle disappears

1465048025_image.jpg


Cut away the dirt and I had just enough to throw it on a dop and shape the bottom

1465048073_image.jpg


Looks better with no light and not sure how it will go when I cut the top but it is a mass of blue sparkles under the loup

1465050561_image.jpg


:D :D :D a good way to spend a wet evening :D :D :D
 
Looks good Wally. What sort of lap do you polish it on, given that it's a bit on the soft side?
 
Thanks Lefty

I used a type metal lap with 3000 grit to cut the facets and 100000 to finish.

Was surprised how hard the stone was given the folk-law of being soft, the preforming was reasonably fast but slower than I expected to the point that I had good control on the rate of cut.

As the stone is small and I still have my L-plates on the gemmasta, I decided to try cutting a facet on the 3000 on an old lap without recharging it and it worked a treat for control of the cut so I kept with it.

iPad photo just don't do it justice, but from my end, the variance in appearance in different lights has made this exercise a lot of fun.

Currently thinking about how I go about the crown, faceting will be quick and easy but am considering cabbing it, something I havn't done yet.
 
Yeah - it's really only soft compared to a lot of common faceting stones like quartz, zircon, garnet, topaz, sapphire etc. I would not call it soft per se.

Tried to get some more pics, camera still struggling to show what the eye sees. It's so much more vibrant and colourful than the photos can capture.

27440025726_f060ac689e_c.jpg


27402648391_4e46e07878_c.jpg
 
As for being soft , remember its a comparative thing , opal is harder than some metals , bronze for example . So not really that soft:)
 
Ah ... You lazy bastard wally ! Lol , could of put a couple star facets on there ! I kid , looks good ;) all this opal talk , now I'm about to dop two , bit of play in that paully , bit of purple and green or is that the camera ? Happy with the Finnish ?(100,000 or oxide?) you cut at 45% or quartz angles ?
 
LOL Barney. I put twice the number of cuts in the base than a standard brilliant thinking it would help bounce the light around and tried the larger windows on the crown thinking the opal flecks could look more pronounced.

My book had opal at 43 and I cut with 3,000 and 100,000 polish at 44. Very wet gave cleaner edges. Would do at least 45 next time as the opaqueness in my bit seems to suck up the light or I could have a bit of fish eying going on.

Hints of honey yellow base stone with blue/purple opalescent flashes. Under a led loupe, it is a inpenatrible mass of electric blue flecks.
 
Sweet wally :) Anthony said 45 degree minimum to me . But if there is lots of play with some like I have , I'll go with a skinny double rose cut that will window out yet probably exite the play of colour . We will see I quess . I'm about to do a simple oval at 45 to see what happens . Think the critical angle for opal is 43.68 so if no window is wanted probably want to cut at least a degree above that , so 45 min makes sense .
 

Latest posts

Top