Search results

Finally done .

Good going , it is always better with the family .

Here we go again . Also picture of a cold saw bought from Vevor . Works well , straight cuts . Bit loud . Hace placed magnets on discharge side and it helps to catch most of the little feet stabbing bits .

Most from bits and pieces from using a Gemini with a few twists . and this is the 3rd table . First is under https://www.prospectingaustralia.com/threads/12-volt-powered-shaking-table.32181/ That was the trial table made from wood but is still in service and doing the job well . 2nd table was...

May have to zoom to see any gold . Now for next project , sort of Knelson .

Finally gold dirt over the table !

Please Delete post as item has been sold

, some pictures and dimensions in the post .

I have posts in 'DIY ' , mk3 table and 24v table . May give you some ideas .

Concentrate shaking Table , re advertised after some adjustments / modifications . 24 v DC powered or can be changed to 240v ac ,Petrol powered . Size : 700 x850 x 1200 and weight :100kg . Trialed on fine gold concentrate with excellent results . Negotiable , $3,000

My knowledge base has expanded 10 x since I posted . There are so many options , it is causing me a brain strain . Thank you all for contributing .

Thank you for that info . It is hard to get information that you can read .

Freight may not be an issue for a good unit .

A knelson concentrater is used to separate minerals by the use of centrifugal force and water . Mainly used in volume applications . Bit like a washing machine on spin cycle .

Hi all , I am on the hunt for a 30" Knelson . Condition , something rebuild able . Please reply here if you have some information . Thanks .

It has been used to clean cons from a 12" knelson . Max capacity is about 50 to 60 kg of con per hr . Don't think it is large enough for continuous flow from a plant set up . The top is made from a sheet of bathroom laminate , approx $300 for 2.4 x 1.2 x 3mm . Grooves are router cut 6mm x ...

I probably didn't make it clearer , what is going onto the table has been put through a gold wheel 3 times ( similar to a Knelson ) . Hence there are very little heavies left to spread out . Since posting m friend has put straight cons over and is very happy with the recovery . Practically...

Previous Video is of rough cons 2.3 mm .

Thank you for that info . This table has a knock mechanism . Trialed it today with well cleaned cons. , worked well , just waiting for weights .